Flange Assembly with Butt Weld End Connections SAE 3000# and 6000# Series
Flange Assembly with Butt Weld End Connections SAE 3000# & 6000# Series ISO 6162-1-2002
Dimensions : SAE 3000 PSI (Code 61) = 210 bar
DN | PIPE SIZE | Фd | Фd1 | Фd2 | 1 | L | h | h1 | B | B1 | T | A | '0' RING SIZE | HEX.HD.CAP SCREW SIZE | |
INCH | MM | ODxWT | AFH | ||||||||||||
AFU | |||||||||||||||
1/2" | 13 | 20.0x3.0 | 20 | 14.0 | 30.2 | 30 | 60 | 13 | 19 | 54 | 46 | 38.1 | 17.5 | 18.64x3.53 | M8x25/ 5/16"_18UNC x 11/4" |
22.0x2.0 | 22 | 18.0 | |||||||||||||
21.3x2.6 | 22 | 16.0 | |||||||||||||
M8x40/ 5/16"_18UNC x 11/2" |
|||||||||||||||
3/4" | 19 | 22 x 2.0 | 22 | 18.0 | 38.1 | 35 | 70 | 14 | 22 | 65 | 52 | 47.6 | 22.3 | 24.99 x 3.53 | M 10x30/ 3/8"_16UNC x 11/4" |
25.0x3.0 | 25 | 19.0 | |||||||||||||
26.9x3.6 | 27 | 19.5 | |||||||||||||
M 10x40/ 3/8"_16UNC x 11/2" |
|||||||||||||||
1" | 25 | 30.0x4.0 | 30 | 22.0 | 44.4 | 40 | 80 | 16 | 24 | 70 | 59 | 52.4 | 26.2 | 32.92 x 3.53 | M 10x30/ 3/8"_16UNC x 11/4" |
35.0x4.0 | 35 | 27.0 | |||||||||||||
33.7x3.2 | 34 | 27.0 | |||||||||||||
38.0x2.5 | 38 | 33.0 | M 10x45/ 3/8"_16UNC x 2" |
||||||||||||
38.0x4.0 | 38 | 30.0 | |||||||||||||
11/4" | 32 | 38.0x4.0 | 38 | 30.0 | 50.8 | 45 | 90 | 16 | 22 | 80 | 73 | 58.7 | 30.2 | 37.69x3.53 | M 10x30/ 7/16"_14UNC x 11/2" |
42.0x3.0 | 42 | 36.0 | |||||||||||||
42.3x3.2 | 43 | 36.0 | |||||||||||||
42.4x5.6 | 43 | 31.2 | M 10x50
/ 7/16"_14UNC x 2" |
||||||||||||
11/2" | 38 | 38.0x4.0 | 38 | 30.0 | 60.3 | 50 | 100 | 16 | 25 | 94 | 83 | 69.9 | 35.7 | 47.22x3.53 | M 12x35/ 1/2"_13UNC x 11/2" |
42.0x3.0 | 42 | 36.0 | |||||||||||||
48.3x4.5 | 49 | 39.0 | |||||||||||||
48.3x6.3 | 49 | 35.5 | M 12x50/ 1/2"_13UNC x 2" |
||||||||||||
2" | 51 | 42.0x3.0 | 42 | 36.0 | 71.4 | 60 | 120 | 16 | 26 | 102 | 97 | 77.8 | 42.9 | 56.74 x 3.53 | M 12x35/ 1/2"_13UNC x 11/2" |
42.3x3.2 | 43 | 36.0 | |||||||||||||
48.3x3.2 | 49 | 42.0 | |||||||||||||
60.3x5.6 | 61 | 49.0 | |||||||||||||
60.3x8.0 | 61 | 44.0 | M12x50/ 1/2"_13UNC x 2" |
||||||||||||
NOTES:* PN 170 bar
** PN 140 bar
*** PN 35 bar
NOTE: ISO: 6162 does not have a separate series for flange assembly with socket weld end connections. The entire assembly remains the same as butt weld end connections shown above. However, the sleeves are welded with adaptors to convert the butt weld to socket weld end connections and dimensions can be given on request.
The use of the ISO: 6162 system increases the overall length of the flange assembly which may not be acceptable in the piping design. For socket weld end connections, designers usually prefer the two-piece system based on ISO: 6162 dimensions shown on pages 25-27 of the catalog.